Indoor Kiosks

Back to Back Sleek Indoor Kiosk

Designed for your digital signage application

PDGIDPK-BB (49/55)

The PDGIDPK-BB indoor portrait kiosks come in sizes 49”and 55”. The PDGIDPK49-BB comes with (2) Samsung QM49R displays and the PDGIDPK55-BB comes with (2) Samsung QM55R displays.

The Samsung QM series displays come with an SOC (system on chip) so there is no need for a media player. If your application requires a specific media player there are previsions to support these in the lower section of the cabinet.

In the event that touch is needed PDG will supply either a Pcap or IR touch overlay at an additional cost. These kiosks can be customized to support cameras, card readers and RFD readers at an additional cost.

These sleek, stylish kiosks offers the ruggedness needed in today’s market place and the simple installation and maintenance design wanted by today’s technicians.

Constructed using 14 GA. high impact steel will insure longevity and years of use. This kiosk can be painted any color you desire and can also include printed decals and kiosk wraps.

Download PDF

55” Sleek Indoor Kiosk

Designed for your digital signage application

PDGIDPK55

PDG’s Sleek Portrait Kiosk is your ideal solution for any indoor digital signage needs. The kiosk can fit virtually any 55” commercial display and is available in Touch and Non-Touch. The kiosk has been designed with ease in mind. Once in place, the kiosk can be up and running in a matter of minutes. Be sure to ask PDG about any custom options for any application.

Features

The kiosk is constructed from 14GA Mild Steel
The kiosk can be Powder coated with (50) different color selections
Interior media player tray to support media players, routers and other integrated components
Available in Touch and Non-Touch
Supports almost every 55” commercial display
Six outlet surge suppressor included

Download PDF

15” & 22” Touch Kiosk

Designed for your digital signage application

IDLK15/IDLK22

The PDG IDLK15-22 indoor landscape kiosk is designed to support Mimo Monitor’s 15” and 22” touch displays. This kiosk is perfect for QSR self-ordering and restaurants that need a kiosk where people can use for takeout orders. It also works perfectly for corporate offices for check-in and check-out and any other setting where a small format touch kiosk is required.

This kiosk is equipped with an access door on the base for media player storage and come with a double duplex outlet. The kiosk is also supplied with anti-slip adjustable rubber feet to ease in perfect leveling of the kiosk on any floor surface. It can also come with a card reader and camera as add-on options.

The kiosk is constructed using 14 GA. high impact steel and built to take public traffic and bumps and bruises. This kiosk can be painted any color you desire and can also include printed decals and kiosk wraps.

Download PDF

32”- 55” Indoor Touch Kiosk

Designed for your digital signage application

IDLK32-55

The PDG IDLK32-55 indoor landscape kiosk is designed to support any commercial display from sizes 32” to 55”. This kiosk can come in touch and non-touch using TSI Touch overlays. This kiosk features (2) gas springs that assist in lifting the hood for full access to the back of the display. The hood is designed with side bumpers to withstand hard hits from consumer traffic and packages.

This kiosk is part pf PDG’s family of indoor landscape kiosks and is perfect for content and CMS partners who want to buy and then re-sell to the end users.

The kiosk is constructed using 14 GA. high impact steel and built to take public traffic and bumps and bruises. It is perfect for malls, college campuses, retail locations and a host of other applications. This kiosk can be painted any color you desire and can also include printed decals and kiosk wraps.

Download PDF

42” Sleek Indoor Touch Kiosk

Designed for your digital signage application

IDLK42

The PDG IDLK42 indoor landscape kiosk is designed to support the ELO 4202L touch display. This kiosk features a sleek minimalistic modern look with no bulky top cabinet to support the ELO display. The kiosk base has a radius bottom which provides a smooth transition to the base support.

This kiosk is part pf PDG’s family of indoor landscape kiosks and is perfect for content and CMS partners who want to buy and then re-sell to the end users.

The kiosk is constructed using 14 GA. high impact steel and built to take public traffic and bumps and bruises. It is perfect for malls, college campuses, retail locations and a host of other applications. This kiosk can be painted any color you desire and can also include printed decals and kiosk wraps.

Download PDF

32”-55” On-Wall Kiosk

Designed for your digital signage application

IDLWM32-55

The PDG IDLWM32-55 indoor landscape wall mount kiosk is designed to support any commercial display from sizes 32” to 55”. This kiosk can come in touch and non-touch using TSI Touch overlays. This kiosk features vertical side rails to enhance the aesthetics and can be painted a different color than the kiosk body. The front hood hinges down to gain full access to the inside of the kiosk during normal routine maintenance.

This kiosk is part pf PDG’s family of indoor landscape on-wall kiosks and is perfect for content and CMS partners who want to buy and then re-sell to the end users.

The kiosk is constructed using 14 GA. high impact steel and built to take public traffic and bumps and bruises. It is perfect for malls, college campuses, retail locations and a host of other applications. This kiosk can be painted any color you desire and can also include printed decals and kiosk wraps.

Download PDF

32”-55” On-Wall Kiosk

Designed for your digital signage application

IDPWM32-55

The PDG IDPWM32-55 indoor portrait wall mount kiosk is designed to support any commercial display from sizes 32” to 55”. This kiosk can come in touch and non-touch using TSI Touch overlays. This kiosk features vertical side rails to enhance the aesthetics and can be painted a different color than the kiosk body. The front hood hinges down to gain full access to the inside of the kiosk during normal routine maintenance.

This kiosk is part pf PDG’s family of indoor landscape on-wall kiosks and is perfect for content and CMS partners who want to buy and then re-sell to the end users.

The kiosk is constructed using 14 GA. high impact steel and built to take public traffic and bumps and bruises. It is perfect for malls, college campuses, retail locations and a host of other applications. This kiosk can be painted any color you desire and can also include printed decals and kiosk wraps.

Download PDF

SONY 55” INDOOR KIOSK

Designed for your digital signage application

SONYIDPK55

The PDG SONYIDPK55 indoor portrait kiosk is designed to support Sony’s slim 55” BRAVIA FW-55BZ40H which combines a bright 4K HDR image quality with a built in media player, providing flexible networking/control and extensive integration options.

This kiosk is part of PDG’s family of indoor and outdoor portrait kiosks and is perfect for content and CMS partners who want to buy and then re-sell to the end users.

Constructed using 14 GA. high impact steel and shatter resistant polycarbonate display cover will insure longevity and years of use. This kiosk can be painted any color you desire and can also include printed decals and kiosk wraps.

Download PDF

SONY 65” INDOOR KIOSK

Designed for your digital signage application

SONYIDPK65

The PDG SONYIDPK65 indoor portrait kiosk is designed to support Sony’s slim 65” BRAVIA FW-65BZ40H which combines a bright 4K HDR image quality with a built in media player, providing flexible networking/control and extensive integration options.

This kiosk is part of PDG’s family of indoor and outdoor portrait kiosks and is perfect for content and CMS partners who want to buy and then re-sell to the end users.

Constructed using 14 GA. high impact steel and shatter resistant polycarbonate display cover will insure longevity and years of use. This kiosk can be painted any color you desire and can also include printed decals and kiosk wraps.

Download PDF

Gallery